Wu/FE
The Tungsten points are arc resistance, redectory,and less current consumption when the metal contact on surface,strong on-off current capability, good wear properties and dynamic performance hit.And its cheaper than any other metal or alloy material.
Mainly used in the electric products such as automobiles, motorcycles, electric horn, magneto etc.
|
Material |
Composition（%） |
Grain number（PCS/mm2） |
Density g/cm3 |
Hardness HV(Mpa) |
|
Wu |
≥99.95 |
10000-20000 |
≥19.0 |
680 |
 |
 |
 |
| Longitudinal Section Picture | Rivet Picture | Rivet Structure |
|
Shank Diameter (d) |
Head Diameter (D) |
Shank Length (L) |
||||
|
|
3.0 |
3.5 |
4.0 |
5.0 |
6.0 |
|
|
Φ1.5 |
|
|
|
|
|
1.5~2.0 |
|
Φ2.0 |
|
|
|
|
|
1.5~3.0 |
|
Φ2.5 |
|
|
|
|
|
1.5~3.0 |
|
Φ3.0 |
|
|
|
|
|
1.5~3.0 |
|
Head Diameter |
Head Thickness |
Shank Length |
Shank Diameter |
Layer Thickness |
|
±0.10 |
±0.05 |
±0.15 |
-0.02 -0.10 |
S＞0.6 |
we can produced samples as the customers'requirment,they are divided into solid rivets , semi-tublar rivets and hollow rivets .
Silver alloy wire (bonding silver wire), is currently the most suitable alternative to gold wire soldering consumables. In the LED package to play the role of wire c...
Electrical contact materials have a history of nearly 100 years, initially using pure silver, pure gold, pure platinum to make contact materials; the 1940s began to ...
Precision stamped parts, which are made with high-precision dies, complete the blanking process by positioning them in one clamping. The workpiece on the punching ma...
As a manufacturer of electrical metal stamping parts, we have an in-depth understanding of the design principles and characteristics of stamping parts, so we will ta...
Precision Metal Stamping, which are made with high-precision dies, complete the blanking process by positioning them in one clamping. The workpiece on the punching m...
China
Pусский
Español
EN
