NAME: Silver Contact Tip
Main Material: AgcdO, AgSnO2, AgCdO/Cu, AgSnO2/Cu ETC
Can be customized
Oxidized Contacts
Product Material
Bimetal Rivets: Ag. FAg. AgNi. AgCdO. AgSnO2. AgSnO2In2O3. AgZnO. AgCu. CuNi. Cu
General Description
Bimetal contact buttons can be supplied in a large varitey of configurations and combinations of materials, The material of the working layer may be Ag, AgCdO or AgNi, Forthe side to be welded to the support material steel or Cu-Ni alloy can be used,The thickness of top working layer is within half of the top layer thickness. In the standard design the contactbuttons have 3, 5 or 7 spherical projections, Other numbers of projections and shapes of the projections,however,are also possible
Standard Dimensions
| Shank Diameter(d) | Head Diameter(D) | Shank Length(L) | |||||||||
| 2.5 | 3 | 3.5 | 4 | 4.5 | 5 | 5.5 | 6 | 7 | 8 | ||
| Φ1.2 | 0.6~1.5 | ||||||||||
| Φ1.5 | 0.8~2.0 | ||||||||||
| Φ1.65 | 0.8~2.0 | ||||||||||
| Φ1.8 | 1.0~2.5 | ||||||||||
| Φ2.0 | 1.0~2.5 | ||||||||||
| Φ2.35 | 1.5~3.5 | ||||||||||
| Φ2.5 | 1.5~3.5 | ||||||||||
| Φ3.0 | 1.5~5.0 | ||||||||||
| Φ3.5 | 2.0~5.0 | ||||||||||
| Φ4.0 | 2.0~5.0 | ||||||||||
| Head Diameter | Head Thickness | Shank Length | Shank Diameter | Silver Layer Thickness | Angle | Spherical Radius |
| ±0.10 | ±0.05 | ±0.15 0 |
-0.12 | S≤0.4: S>0.4: |
±0.2° | ±0.2R |
Application Scope
Bimetal Rivets: Ag. FAg. AgNi. AgCdO. AgSnO2. AgSnO2In2O3. AgZnO. AgCu. CuNi. CuBimetal contact buttons are used by means of the impulse welding technique.Components produced by this method are utilized,e,g,.in temerature controllers or small power relays.
Differnt series,type and sizes of products can be delivered according to customers requirements.
The biggest advantage of silver contacts is to increase the frequency of use of the conductor, increase the contact effect, and enhance the performance of the conduc...
Silver and fine grain silver(FAg)possess very high electrical and thermal conductivity,low and stable contact resistance,and good workability.For silver resistance t...
AgNi materials have higher resistance to arc erosion and contact welding than Ag or FAg.Both Properties are improved withincreasing Ni content. All AgNi materials sh...
Connectors, also known as connectors, plugs and sockets in the country. Generally refers to electrical connectors. That is, a device that connects two active devices...
China
Pусский
Español
EN
