Sterling silver contacts, contacts, rivets Ag sterling silver and fine-grained silver have high electrical and thermal conductivity, low and stable contact resistance, good welding and processing performan...
Use machines to process animal and aquatic food. Crushing knives, breaking hammers, particle knives, filters, fuel drying nets, vacuum cleaners, air conditioners, generator cooling, mechanical protection n...
Rivet contact products are manufactured by cold heading forming method. The main products are: Ag/Cu、FAg/Cu 、AgNi/Cu、AgSnO2/Cu、AgSnO2In2O3/Cu、AgCu/Cu、AgZnO/Cu、AgCdO/Cu etc. Double composite rivet contacts...
Features of bimetal silver contact Silver is the best of electrical conductors
The biggest advantage of silver contacts is to increase the frequency of use of the conductor, increase the contact effect, and enhance the performance of the conductor. Silver contacts are widely used in ...
Silver and fine grain silver(FAg)possess very high electrical and thermal conductivity,low and stable contact resistance,and good workability.For silver resistance to arc erosion and contact welding are li...
AgNi materials have higher resistance to arc erosion and contact welding than Ag or FAg.Both Properties are improved withincreasing Ni content. All AgNi materials show good workability and are easy to weld...
AgCdO contacts belong to the group of the most widely used ones on the field of low voltage electric apparatus.They combine a satisfactory resistance against contact welding with a good arc erosion resista...
By introducing certain additives,the AgSnO2 materials,produced by the powder metallurgy technique can be modified in such a manner that contact resistance and over temperature behavior can be maintained lo...
By introducing certain additives,the AgSnO2 materials,produced by the powder metallurgy technique can be modified in such a manner that contact resistance and over temperature behavior can be maintained lo...
Bimetal contact buttons can be supplied in a large varitey of configurations and combinations of materials, The material of the working layer may be Ag,AgCdO or AgNi,Forthe side to be welded to the support...
China
Pусский
Español
EN